XC Accurate Honesty 350 Height Finder

Ⅰ, Overview:
Altimeter is a vertical single-coordinate digital geometric measuring instrument based on precision machinery, modern sensing technology and electronic technology. It is widely used in precision measurement of precision machinery, mold, hardware and other industries. It has the characteristics of simple operation and high measurement accuracy.

Ⅱ, product characteristics
one Built-in temperature compensation, suitable for workshop
environment measurement;
2, the measuring force can be adjusted;
3, built-in air flotation device, easy to move;
4, can measure the height, thickness, slot width, internal and external aperture, hole distance and the highest point, the lowest point, Angle, etc.
5, manual fast movement, to achieve rapid measurement;
6, the measurement speed is adjustable.

Ⅲ, technical parameters:
Model : JC-TYPE600
Measuring range: 600mm
Grating ruler resolution: 0.0005mm
Maximum manual pull displacement speed (mm/s) : 1000mm/s
Maximum electric displacement speed (mm/s) : 150mm/s
Measured force (N) : 0.5 ~ 1.8
Power: Power adapter power supply
Control mode: manual
Measurement accuracy: 2.0+L/200
Weight (kg) : 20kg
Operating temperature (℃) : +10 ~ +40

IV, Function description:
1. Height measurement mode

This mode measures the height values of the upper and lower planes.

2.Circle Measurement mode

This mode measures the height and diameter of the center of a round hole (inner circle) and a cylinder (outer circle).
【 Note 】 The surface quality and smoothness of the hole or cylinder may affect the measurement accuracy.

3. Angle measurement mode
Angle measurement requires a standard block or block gauge with a length of not less than 150mm. The steps are as follows:

a. Measure the thickness of the block gauge on the platform, press the SET key to pop up the menu as shown in the figure, enter the thickness value into the “Measure Angle block gauge height” column, or enter the known height value of the block gauge directly. (Press TAB key to move the cursor, press number key to Enter, press Enter key to confirm and exit)

b. Hold the standard block against the two pillars of the height measuring instrument, and measure the workpiece according to the screen display.

c. Clamp the block gauge between the standard block and the workpiece, and measure closely, and the measured value is directly displayed in the result file.

V、Configuration list: